register free | resend password

Manufacturing & Production

Themenbereich / Manufacturing & Production


Sortiere PresseMitteilungen nach: Titel (A\D) Datum (A\D)

Seiten sind aktuell sortiert nach: Datum (erst neue PresseMitteilungen)

Industry 4.0 live at Hannover Messe

The development partners Baum The Technology BAUDIS IoT is the solution for the intelligent networking of machines and systems around the world. Using a retrofittable BAUDIS IoT box or a commercially available industrial PC with OPC UA interface, BAUDIS IoT is used to collect, analyze and transmit data, such as currents, temperature and speed. The system can be used as a retrofittable brownfield solution for existing machines or as an integrated solution for new machines and systems, regardless of the manufacturer of the automation components and the sensor system. For example, Baum there are ...

20.04.2018

Process Optimization and Reliability

In the context of its Industry 4.0 solution, the drive and automation specialist Baum The task of BAUDIS IoT is to collect, analyze and communicate data. The software either runs as an integrated version e.g. on an industrial PC or on the retrofittable BAUDIS IoT box. The interface of choice for transmitting data to the cloud at Baum BAUDIS IoT is designed for two application scenarios: one for reducing downtimes from unplanned service cases and one for optimizing process and machine utilization. Data is recorded by local sensors e.g. on the drive or also via access on other electrical or mech ...

20.04.2018

Digital twin as an Engineering Service

Making machines and systems future-proof and ideal for applications requires time, experience and is an intensive engineering process. At Hannover Messe 2018 in hall 14 at stand H12, Baumor already during the development stage, even though the machine does not (yet) really exist. In addition to reducing the development time, this also significantly reduces the effort for commissioning. Software functionalities and controller algorithms can already be tested at an early stage on the virtual machine. Structural and systematic errors are thus detected and corrected at an early stage. Baum Simulat ...

20.04.2018

Demag quadro chain hoist for a broad range of applications

Series hoist unit with four pick-up points Precise handling thanks to mechanical synchronisation One motor for four chain drives /ins Wetter, Germany, 12 April 2018. Fitted with four load hooks, the Demag LDC-Q quadro chain hoist allows different load handling attachments to be lifted and transported at the same time. The available LDC-Q sizes enable loads weighing up to 3.2 t to be handled safely and efficiently. The Demag LDC-Q quadro chain hoist, a series hoist unit from Demag’s DC range that has a successful track record all over the world, can be used for a wide variety of handlin ...

20.04.2018

Microsoft BI SSAS Tabular: on the power of DAX Measures

Data Analysis Expressions (DAX) is a query and modelling language for SQL Server Analysis Services (SSAS) Tabular, Power-BI, and Excel Power Pivot. Calculated columns, tables, and user-defined Measures can be created at a very sophisticated level. How useful DAX is in business practice is impressively illustrated by a development in the area of the Development in Pay Act. This relatively new law provides employees with the right to demand valid proof from their employer for the commensurability of their own remuneration in comparison to employees with similar activities. With the help of the H ...

19.04.2018

ISEC7 Group is Enterprise Mobility Accelerator

ISEC7 Group (ISEC7), enterprise mobility expert from Hamburg, is one of the best service providers for enterprise mobility transformation & service according to the independent IT research and consulting company Crisp Research AG. In its current report ?Crisp Vendor Universe, Enterprise Mobility Supplier and Service Provider?, ISEC7 is positioned as an accelerator in the market - with its combination of partner solutions and proprietary applications. Thus, ISEC7 is the study?s leading distinct EMM solution provider. Divided in two main categories, ?Vendor Performance? and ?Service Value Cr ...

19.04.2018

MedTech: How a Modern MES Increases Efficiency

The level of operational efficiency strongly dictates manufacturing profit. How can it not, as it is the ratio between output gained from manufacturing and the input required to produce it. For the Medical Device manufacturing industry, however, the relationship is a complex one, as increasingly sophisticated products and stringent regulations require multiple processes and checks. Moreover, increasing efficiency means nothing without maintaining, or even improving, quality. Manufacturing Execution Systems (MES) have been gradually adopted over the last decade in the manufacture of medical dev ...

19.04.2018

nextLAP presents SmartRack for rapid and flexible digitisation of order-picking processes

nextLAP GmbH, a specialist in IoT-based solutions for the digital management and automation of production and logistics processes, has developed SmartRack, a solution which is used, among other things, for the efficient digitisation of order-picking processes in production and logistics. It leverages IoT devices and is connected to an IP/1 platform ? both in-house developments of nextLAP. SmartRack allows factories to optimise their material flows, ergonomics and inventories using real-time data. Electronics supplier Limtronik will demonstrate how it works at stand D26, hall 7 at HANNOVER MESS ...

19.04.2018

ULVAC Announces the LS High-speed Series of Dry Vacuum Pump

Chigasaki, Japan, Apr 19, 2018 - (JCN Newswire) - ULVAC, Inc., the global leader in vacuum technologies and solutions, announces the LS Vacuum series, a range of dry vacuum pumps with high pumping speeds and low power consumption. The LS range provides high pumping speed at near atmospheric pressure, thereby shortening pumping down time. Dry vacuum pumps are used in many production lines, including those for electronic parts and displays, for reasons including low power consumption. However, typical dry vacuum pumps with low power consumption tend towards long pumping down time, as they have ...

19.04.2018

ULVAC Announces the LS High-speed Series of Dry Vacuum Pump

Chigasaki, Japan, Apr 19, 2018 - (JCN Newswire) - ULVAC, Inc., the global leader in vacuum technologies and solutions, announces the LS Vacuum series, a range of dry vacuum pumps with high pumping speeds and low power consumption. The LS range provides high pumping speed at near atmospheric pressure, thereby shortening pumping down time. Dry vacuum pumps are used in many production lines, including those for electronic parts and displays, for reasons including low power consumption. However, typical dry vacuum pumps with low power consumption tend towards long pumping down time, as they hav ...

19.04.2018

Intelligent Finding instead of Part Safari - Track hidden components with CADENAS

Endless expanses, pure wilderness, fascinating animals: A safari is a unique experience. Equipped with binoculars and camera, you set out in search of those shy animals. Unfortunately, there is no guarantee that you will actually find any of them: In the worst case, you could travel around for a week without spotting a whole lot of animals. What might be acceptable on a safari is not so desirable in the daily work of an engineer. Rather than wandering aimlessly around in a wilderness of parts, it would be good to know where those hidden objects can be found. Because: Finding components that al ...

18.04.2018

Apliqo launches two new software solutions

On April 17, 2018, Apliqo AG is launching two innovative extensions of its product range onto the market. With the redesigned Version 2.0 of Apliqo UX and the launch of the Apliqo C&C (financial consolidation and close) solution, the software company based in Zurich is targeting additional customer segments and setting another milestone on its successful expansion course. Apliqo UX is a web-based front-end application for IBM Planning Analytics (formerly known as TM1.) With Apliqo UX offers a modern web-based interface for IBM Planning Analytics that is geared towards enabling company wide ...

17.04.2018

Full-service Portfolio for Digital Healthcare: Arvato Systems and Partners at conhIT 2018

br /> Arvato Systems is exhibiting at the largest IT trade fair for the healthcare industry for the first time Together with eHealthExperts and secunet Security Networks AG, Arvato Systems present a new service portfolio for VPN access Arvato Systems will start exhibiting at the most important trade fair for healthcare IT: conhIT, held in Berlin. Together with its project partners, the IT service provider will present a full-service range for secure access to the telematics infrastructure (TI) through VPN (virtual private network) access. The three companies, who boast over a decade in coll ...

17.04.2018

Customer magazine: 2017 was no doubt the year of Industry 4.0 - The CADENAS year of success

The latest issue of the annual CADENAS customer magazine "Joint Success 2017" provides exciting insights into successful projects with customers and partners. The customer magazine also includes innovations in CADENAS software solutions as well as reviews on numerous events of the past year. "With our customer magazine, we not only want to show our technological know-how but, above all, who we are as a team and a company," explains J 2017 was the year of Industry 4.0 for CADENAS ? we head into the future together with our customers and are a part of the digital revolution w ...

17.04.2018

Auconet, Now With Beta Systems, Showcases NAC for IT, OT, ICS&SCADA, at RSA 2018

Auconet, a leader in next-generation IT Operations Management (ITOM), has joined forces with Beta Systems DCI Software AG, as a business unit, complementing and extending Beta Systems? solutions portfolio. At RSA this week, Auconet will showcase its NAC solution for IT, OT, ICS and SCADA networks, including its single-pane-of-glass productivity dashboard for visual, intuitive network operations. Beta Systems and Auconet have forged a strong relationship over the past ten years, as Auconet software complements the Beta Systems Data Center Intelligence (DCI) portfolio. ?Auconet?s flagship produc ...

16.04.2018

The community of safe drivers created by Kasko2go is now supported by a credible car service search platform

The Kasko2go team is excited to announce the beginning of cooperation with Autobooking.com international company. Aside from being provided with safety through an innovative insurance application, drivers now have a chance to find, choose, and book an optimal and proven car service via the international marketplace. Autobooking.com is the company that makes it possible for drivers to find reliable motor vehicle garages within close proximity to their household. The platform goes far beyond providing a list of nearby car services: it gives an opportunity to book a garage without wasting time on ...

16.04.2018

EU GDPR: PowerFolder?s special offer for businesses

On May 25th, the EU GDPR, the European General Data Protection Regulation comes into force. To mark this development, dal33t GmbH is offering its proven File Sync & Share solution PowerFolder at an unbeatable special price up to this deadline - providing companies a highly cost-effective way to rely on a secure solution that is Made in Germany. The entry into force of the European General Data Protection Regulation (GDPR) will affect many companies that are still quite unprepared for it, despite the long lead time. According to various surveys, at the turn of the year, only half of the com ...

13.04.2018

Dr. Klaus Birken receives award as GENIVI?s Most Valuable Contributor

Twice a year, the GENIVI Alliance gives the Most Valuable Contributers Awards to individuals or companies that excel in the GENIVI Alliance through exceptional performance, particularly in the domains of Code Contribution and Technical Leadership. This year, Dr. Klaus Birken, Principal Engineer in the automotive sector at itemis AG in Stuttgart, is among the winners. He is particularly honored for his contribution to the activities of the GENIVI Alliance as initiator and technical lead of the open source project Franca. This project was initiated to ensure the required interoperability of comp ...

12.04.2018

LibreOffice Online Packages by Kopano Now Available as Public Download

Today, Kopano announced the availability of the first LibreOffice Online packages built by Kopano. As a new member of the Advisory Board of The Document Foundation, Kopano strives to extend the reach of LibreOffice. With the new packages being publicly available, Kopano?s build of LibreOffice Online is now at the fingertips of millions of people. Tens of millions of people, including employees of large institutions like the French Government, Italy''s Ministry of Defense and the administration of the Spanish autonomous region of Valencia, are already using the desktop application of ...

12.04.2018

ISEC7 Announces Acquisition of PaRaBaL to Strengthen Global Footprint as Enterprise Mobility Management Leader

ISEC7 Group (ISEC7) unites with PaRaBaL Incorporated (PaRaBaL) to meet the increasing market demands for Enterprise Mobility Management (EMM) solutions predicted to reach $2.2B by 2022 (source). Both companies have long-standing commitments to their customers? mobile experience specializing in developing, implementing and operating mobile infrastructures. With their 100% focus on mobile operational excellence, customers reap the benefits of management dashboards and tools to aid continuous security and compliance. ?ISEC7 and PaRaBaL are a strong combined force. Both companies have extremely hi ...

11.04.2018


Page 1 from 192:  1 2  3  4  5  .. » 192





All members: 8 122
Register today: 2
Register yesterday: 0
Members online: 0
Guests online: 45


Don't have an account yet? You can create one. As registered user you have some advantages like theme manager, comments configuration and post comments with your name.