register free | resend password

Manufacturing & Production

Themenbereich / Manufacturing & Production


Sortiere PresseMitteilungen nach: Titel (A\D) Datum (A\D)

Seiten sind aktuell sortiert nach: Datum (erst neue PresseMitteilungen)

Raynet releases RayPack Studio 5.1 and paves the way to market leadership

Raynet, Europe''s leading provider of services and products for Application Lifecycle Management, today officially releases the new version 5.1 of its software packaging solution, RayPack Studio. In addition to renaming its packaging suite to RayPack Studio, Raynet''s new version delivers the most innovative features that raise the world of packaging to a new level. The Paderborn-based IT specialist already presented the highlights of version 5.1 and impressed the visitors to the full extent at the largest packaging event in the Netherlands in October. Raynet''s n ...

12.12.2017

VPN Access Service for Telematics Infrastructure: ZIS GmbH Commissions Arvato Systems

br /> Arvato Systems will secure the connection to the telematics infrastructure for the clients of ZIS GmbH Arvato Systems and its partner companies will act as one of the first service providers as part of the TI roll-out, providing all services Arvato Systems will supply VPN access service and the connectors required for connecting to the telematics infrastructure for ZIS GmbH, a wholly owned subsidiary of the Association of Statutory Health Insurance Dentists of Westphalia-Lippe (KZVWL). The Bertelsmann Group IT specialist that services the healthcare industry was commissioned in 2013 w ...

12.12.2017

New SAP S/4HANA Downstream Solutions for Secondary Distribution Management Developed by Implico Now Available

SAP S/4HANA is making its mark in the downstream industry. As of yesterday, SAP''s new solutions for the oil and gas industry have been available with their full range of features. SAP?s integrated in-memory database technology and the new denormalization procedure accelerate data processing considerably, providing the basis for digital transformation. Although these new SAP solutions can only now be fully utilized, the Implico Group already has a globally unmatched wealth of expertise in this area. As a long-term development partner of SAP, the Hamburg-based consultancy company has ...

12.12.2017

Micro cutting for everyone!

FAWJ-a unique cutting technology FAWJ technique requires a special cutting head and is a waterjet cutting process suitable for very fine abrasives so metals and other hard materials could be processed with incisions as thin as 0.2 mm. The cutting process has all the advantages that water jet cutting means. It is simple and versatile, with a very smooth surface that requires no or very little post-processing, and there is no influence of the material constituent. The FAWJ technology also allows you to cut quite thick materials. The thickness varies depending on the type of material. Micro ...

12.12.2017

EFI and Xerox Elevate Workgroup Printing with Fiery Server for Xerox AltaLink C8000 Colour Multifunction Printers

Electronics for ImagingXeroxXerox EX-c C8000 Print ServerAltaLink "With the new Fiery server for the AltaLink C8000 Series MFPs, EFI and Xerox elevate the quality standard for workgroup printing," said John Henze, vice president, Fiery marketing, EFI. "Customers get the best of both worlds: the highest colour quality and an efficient, connected workflow that helps them be more productive and reduce print outsourcing." New workgroup-focused hardware platform The Xerox EX-c C8000 Print Server is the first server on a new Fiery platform designed to provide a lower-cost option ...

11.12.2017

toolcraft selects Simufact Additive to accelerate manufacturing processes

In order to dramatically improve its service to its customers, full service 3D metal printing provider toolcraft has selected Simufact Additive. Additive manufacturing processes will be simulated before the physical build process in order to move from trial-and-error to a more predictive production process. Optimize 3D printing processes before the physical build process Using simulation software, toolcraft is able to optimize manufacturing processes and make them more efficient and more economically viable. ?We have tested Simufact Additive extensively and saw that the solution is going to he ...

08.12.2017

Free plugin for the 3D graphics software Blender facilitates export and upload of 3D models on PARTcloud.net

Anyone working with the free 3D graphics software Belnder can now receive a free plugin from CADENAS. This plugin will allow them to upload their 3D CAD models easier and faster directly from the CAD system to the PARTcloud.net exchange platform to share them with their colleagues and friends. Unpack the file and upload 3D models directly In the upload area of PARTcloud.net users have a button, which allows for a ZIP file to be downloaded. The file must be unpacked to be able to insert the folder ?io_online_partcloud? into the blender folder ?addons?. Within the Blender software the tab ?User ...

08.12.2017

Pleasant surprise for PARTcommunity: New download record of more than 25.5 million

There was good reason for CADENAS to be happy already a month before Christmas: In November, the 3D CAD models download portal PARTcommunity registered an absolute record for CAD downloads per month of nearly 25.5 million parts. "We''re excited that our users are so convinced about PARTcommunity and treat us to such record numbers", says J"Together with the increasing number of users, it''s important feedback for us. They also let us know which parts and manufacturer catalogs they require via the preferred catalog function. We do all we can to continually exp ...

08.12.2017

Vector Informatik GmbH and SYSGO AG join forces for AUTOSAR Adaptive

The IT companies Vector and SYSGO have founded a joint venture for the development of embedded software. The aim of the cooperation is to create an integrated software platform consisting of the AUTOSAR adaptive basic software MICROSAR and the real-time operating system PikeOS. SYSGO, Europe''s leading provider of operating systems in critical environments, is contributing its comprehensive aviation safety and security expertise to the 50/50 joint venture. Vector, the Stuttgart-based specialist for embedded systems, has been developing secure AUTOSAR basic software according to ISO 2 ...

07.12.2017

Kisters enhances 3DViewStation WebViewer with 3D fly through and intellectual property protection (IPP)

Kisters North America has released version 2017.1 of its 3DViewStation WebViewer, a powerful 3D CAD viewer and universal viewer for engineers and designers. The new version features several updates, most notably: 3D Fly Through Intellectual Property Protection (IPP). 3DViewStation is known for its modern user-interface, high performance viewing, advanced analysis and integration capabilities for browser and mobile users of tablet PCs, smartphones and notebooks. With 3DViewStation?s WebViewer, there is no client installation required. 3DViewStation ships with current and mature importers for a ...

07.12.2017

MES in Industry 4.0. Move from Corrective-Preventive to Predictive Action

Quality and Maintenance are two of the most important functional areas in manufacturing. Ever since the first assembly line was established, quality of mass produced goods and timely maintenance of shop-floor equipment has always been a challenge, the key points remaining the same: achieving least number of defects and ensuring maximum uptime. When software was introduced in manufacturing, it initially contributed to proper resource management and later with the advent of MES, in process execution, slowly moving towards planned and documented quality and maintenance. However, until recently pr ...

06.12.2017

CLPA announces OPC UA companion specification for new "CSP+ for Machine" technology at SPS/IPC/Drives 2017

The CC-Link Partner Association (CLPA), in association with the OPC Foundation, has announced an OPC UA companion specification for the CLPA?s new ?CSP+ for Machine? technology to further ease the implementation of Industry 4.0 type applications. CSP+ for Machine is an extension of the CLPA?s existing ?CSP+? (Control & Communication System Profile) that provides easy network configuration and maintenance by offering profiles that describe each device on a CC-Link IE or CC-Link network. CSP+ technology has been established for some time and provides easy drag and drop network configuration ...

05.12.2017

OPC Foundation publishes Recommendations for Secure Configuration and Operation of OPC UA

How to realize secure data exchange and communication in industry? The OPC Foundation published a set of practical guidelines for the secure configuration and use of OPC UA in industry. Rapid growth in the networking and digitization of industrial systems has introduced a host of new security challenges that must be addressed systematically to be effectively mitigated. In particular, beyond the need for implementing secure network infrastructures, it is essential to protect product and production data moving throughout the systems. ?Currently, users and developers are overwhelmed with making ...

05.12.2017

Pfeifer and Gleistein join forces

Pfeifer, based in Memmingen, southern Germany, is a leading specialist for wire rope manufacturing, assembly and applications, with annual sales of 260 million euros. With a view to tapping into future-oriented development potentials, Pfeifer initiated talks with Gleistein Ropes last year. The goal was to establish a foundation upon which a strategic partnership could be built. With its innovative strength and state-of-the-art production facilities for all types of fibre ropes, Gleistein Ropes from Bremen, northern Germany, is an ideal partner for Pfeifer. The focus of future joint development ...

04.12.2017

CELUM launches its own marketplace for integration solutions

br /> Customers can request & acquire useful additional modules for CELUM Digital Asset Management via the CELUM Marketplace CELUM thereby enables the seamless integration of third-party systems in the shape of connectors Extensions expand the scope of functions for specific application cases Thanks to its flexibility, CELUM Digital Asset Management is the central content hub in the digital architecture of companies. The software developer CELUM from Linz has set itself the goal to make the collaboration of marketing teams as efficient and simple as possible. In order to meet this goal, ...

04.12.2017

Acando Germany acquires Microsoft Dynamics 365 specialist Anywhere.24

The consulting company Acando GmbH today announces that it has closed the acquisition of Anywhere.24 GmbH, a specialist in Dynamics 365 CRM solutions. Anywhere.24 offers cloud-based solutions and is one of the leading Microsoft Dynamics 365 partners in Germany. With over 15 years of customer relationship management experience, the company operates throughout Germany and is particularly known for their integrated use of the whole Microsoft Dynamics 365 product suite. Anywhere.24 is headquartered in the Munich metropolitan region and employs 60 staff. Effective from 1st January 2018, Acando GmbH ...

04.12.2017

Evolution Achieves High-end, Higher-volume Success with EFI VUTEk LED Hybrid Printer

Electronics For Imaging, Inc. (Nasdaq:EFII) today reported that Northampton, U.K-based graphics production companyEvolutionGS3250lx Previously, when its superwide-format graphics work volumes became too large, the company often outsourced to other providers. Now, Evolution can produce that work in-house with a printer that is several times faster than its old flatbed printer. Although Evolution''s machine operators are new to using the printer, they were able to get trained quickly, taking very little time to start producing high volumes of work - more than 200 2440mm x 1220mm panels ...

30.11.2017

Small button - great effect: Put your parts on your jacket!

Your CADENAS tip for the next trade show As an innovative company, CADENAS is always on the lookout for the latest developments. We have now found a new gadget. These pin buttons for component manufacturers are real eye-catchers and a good way to start up a conversation with customers. Everything you need: Pin, app & CAD model This new type of pin closes the gap between the digital and the real world. Simply load your digital components onto the pin via the corresponding app and display as a GIF or a small video. Just select parts from the Electronic Product Catalog, render as photo-realis ...

30.11.2017

Relaunch of the ADAS iiT website - informative, interactive, intuitive

By ADAS iiT users are taking the centre stage ? this applies not only for the consolidated ADAS end-to-end test solutions but also for the website of ADAS iiT. Therefore the internet presence of ADAS iiT was relaunched by its new corporate design and technology. Relaunch of the ADAS iiT website In the course of the new corporate design of ADAS iiT the new website was revised and now starts with new design, optimized navigation and extensive information. The website was even produced by the involved companies and convinces with ease of use, interactivity, modernity and information diversity. Ce ...

29.11.2017

Industry 4.0. From Concept to Reality: Bringing it all together

In the past few posts we have established how the Industry 4.0 environment can be created and sustained through an MES which is ready for the new revolution. Today, we will revisit the benefits the new and modern MES brings to the entire value chain and understand how challenges of the not so distant future can be met through the successful implementation of an MES ready for I 4.0. First and probably the foremost driver for I 4.0 is the requirement of mass customized products. In reality not all products manufactured today will reduce to a production lot size of one, at least not in the very n ...

29.11.2017


Page 1 from 184:  1 2  3  4  5  .. » 184





All members: 8 020
Register today: 0
Register yesterday: 0
Members online: 0
Guests online: 59


Don't have an account yet? You can create one. As registered user you have some advantages like theme manager, comments configuration and post comments with your name.