register free | resend password

Research & Development

Themenbereich / Research & Development


Sortiere PresseMitteilungen nach: Titel (A\D) Datum (A\D)

Seiten sind aktuell sortiert nach: Datum (erst neue PresseMitteilungen)

Analog Microelectronics introduces its board-level pressure sensor series AMS 6916

Due to the steadily increasing miniaturization in electric applications pressure sensors have to be more and more compact. For applications, where analog outputs are needed, Analog Microelectronics has developed the board level pressure sensor series AMS 6916 with ratiometric 0.5 ? 4.5 V voltage output. Due to their compact dimensions the miniaturized pressure sensors, which are available in multiple variants, can be used in various applications in confined spaces. They are suitable for the measurement of static and dynamic pressure in non-corrosive gases and even in liquids, if they are used ...

23.05.2019

M12x1 PCB sockets two-part, angled, insulation body with O-ring

Today''s modern device connection technology has to meet a wide range of requirements. Not only the miniaturization in engine and mechanical engineering plays a role, but also the increased power requirement for the supply of field devices in automation technology. Even in harsh environmental conditions, secure data transmission must be guaranteed. CONEC expands its range for connections to the device by M12x1 two-part sockets with an O-ring integrated on the insulation body. Due to the O-ring, the socket connectors are sealed against moisture from outside, even when unplugged. The t ...

22.05.2019

Exide Unveils New Generation Carbon Boost 2.0 Technology

Exide Technologies, a global leader in stored energy solutions for the automotive and industrial markets, has launched its latest generation Carbon Boost 2.0 technology for EFB and Premium batteries for Light Vehicles. The new batteries will debut at this year?s Autopromotec exhibition. Carbon Boost is a unique, original equipment solution better current flow within the battery, resulting in improved charge acceptance. It also helps to dissolve the lead sulphate deposits that usually consolidate on a battery?s discharged negative plates, reducing its ability to recharge efficiently. Stringent ...

22.05.2019

Charging stations

Solutions compliant with German calibration law are to provide clarity when charging electric vehicles and ensure kWh-accurate billing. This was the aim of the S.A.F.E Initiative, which was founded by the Physikalisch Technischen Bundesanstalt (PTB, National Metrology Institute of Germany). By receiving the type examination certificate, the manufacturers of charging points can ensure billing in compliance with German calibration law. Two of our partners, the two start-ups ebee smart technologies GmbH from Berlin and the Wirelane GmbH from Munich have been awarded the type examination certifica ...

22.05.2019

BMZ launches innovative high-voltage system on the market

The BMZ Group, leading manufacturer of lithium-ion battery systems in Europe, is supplementing its product range of energy storage systems with the innovative high-voltage system "Hyperion" - a modular expandable system for the residential market on a 300 volt basis. The new storage system was created after intensive market survey and discussion with users, installers and distributors and meets exactly the current pulse of the solar storage market. "The modularity allows both a simple and reliable installation as well as a future expansion of the storage, if higher energy levels ...

22.05.2019

ODU-MAC® PUSH-LOCK ? handy hybrid connector for over 5,000 mating cycles

Since it was founded over 75 years ago, ODU has really made a name for itself as a specialist provider of connection solutions. International production sites, sales all over the world, and a constant thirst for innovation are what set the company apart. ODU has a lot to offer in terms of product management as well: Markus Rochau, when did you join ODU and what is your area of responsibility? I have been working as a product manager at ODU since May 2016 and I am responsible for the ODU-MAC What is the USP of this new product, the ODU-MAC The idea originally came from the customers, who were a ...

22.05.2019

ODU-MAC® PUSH-LOCK - handy hybrid connector for over 5,000 mating cycles

Since it was founded over 75 years ago, ODU has really made a name for itself as a specialist provider of connection solutions. International production sites, sales all over the world, and a constant thirst for innovation are what set the company apart. ODU has a lot to offer in terms of product management as well: Markus Rochau, when did you join ODU and what is your area of responsibility? I have been working as a product manager at ODU since May 2016 and I am responsible for the ODU-MAC What is the USP of this new product, the ODU-MAC The idea originally came from the customers, who were a ...

22.05.2019

Weidmüller VARITECTOR PU ZP: Lightning current arrester for quick installation on 40 mm busbars in the meter cabinet or installation distributor

In accordance with the guidelines of DIN VDE 0100-443 and DIN VDE 0100-534, surge protection is a mandatory component for each power supply ? particularly in building infrastructure. For both commercial and privately used property, it often makes sense to fit surge protection in the mains-side terminal compartment of the meter cabinet or installation distributor. The VARITECTOR PU ZP family from Weidmne type I and type II arresters for lightning and surge protection in one product ? no need for manual cabling. VARITECTOR PU ZP has a clearly visible optical status indicator. The protection stat ...

21.05.2019

HERMETIC SEALING - New ODU MINI-SNAP® receptacles

The innovative, hermetic receptacles of the ODU MINI-SNAP Utilizing the method of glass potting (tested helium leakage rate < 10- The ODU Group is one of the world?s leading suppliers of connector systems, employing 2,300 people around the world. In addition to its company headquarters in M, injection, stamping, turning, surface technology, assembly and cable assembly. The ODU Group sells its products globally through its subsidiaries in China, Denmark, France, Italy, Japan, Korea, Sweden, UK and the US, as well as through numerous international sales partners. ODU connectors e ...

17.05.2019

Drum reeling drag-chain cable for extreme tasks

Authors: Alfred F. Hradil, CEO and Dede B HRADIL, the specialist cable engineering firm from Bietigheim-Bissingen close to Stuttgart presents HighPerformance 43 x 1.5 mmsel as well as cooling fluids and lubricants, it carries either UL or cUL approvals and passed the VDE?s rigorous test for the requirements of DIN 60811. Designed for a tensile strength of up to 4,000 N, 1.2 million alternating bending cycles, very tight bending radii down to 200 mm and reeling speeers. Innovative cable design Designed by Hradil?s engineers as a three-layered cable with 43x1.5 mm Tried and tested safety The Hig ...

17.05.2019

No pre-pricking necessary!

Multi cable bushing systems are extremely convenient as they allow many cables to be inserted in a compact bushing. This saves a great deal of space, especially where installation dimensions are limited. However, when mounting cables and conductors in multiple entries a pre-pricking is usually necessary for the feed-through of cables and conductors. This means not only additional installation work but also a potential risk factor for the safe sealing of the cables. However, this does not have to be the case. With the SKINTOP MULTI-M with metric connection thread developed by LAPP no such pre-p ...

16.05.2019

EBV Elektronik Expands Linecard with Renesas Electronics

EBV Elektronik, an AvnetAVT), announces that it is adding the complete product range of Renesas Electronics, a leading supplier of advanced semiconductor solutions, to its portfolio. This will enable EBV to offer Renesas? broad range of microcontrollers as well as analog, power and system-on-chip products to its customers. The addition of Renesas to EBV?s linecard follows the company?s recent acquisition of EBV supplier Integrated Device Technology (IDT), a leader of RF, high-performance timing, memory interface, real-time and optical interconnects as well as wireless power and sensor solution ...

15.05.2019

ODU connector portfolio, new releases and customized solutions on display at ATE, Hall 10, Booth 1258

ODU combines experience and knowhow with future-forward technologies. At the Automotive Testing Expo in Stuttgart, the specialist for electrical connector technology will be showcasing the company?s newly extended product portfolio. Each of these new solutions was created as a logical extension of the existing portfolio, with the latest market and customer requirements in mind. In addition to the modular rectangular connector ODU-MAClso deliver the respective cable assembly. You?ll find ODU at the Automotive Testing Expo, Hall 10, Booth 1258. For further information go to www.odu.de ODU-MAC Co ...

14.05.2019

Microfans of radial construction for sensor technology

The significance of air quality measurements whether in industry, households or in vehicles is constantly increasing. Manufacturers therefore, should equip their applications with the optimal sensor fan and in this respect SEPA EUROPE is exactly the right partner! SEPA EUROPE has complemented its range of microfans with the radial fan HY20A with the dimensions of 20 x 20 x 6.3 mm. The air intake of the radial fan which is on one side is 2 l/min and with a sound pressure level of 5dB(A) at a distance of 1m, it is virtually inaudible. As is the case with all microfans, the HY20A is equipped with ...

14.05.2019

STW to present electric drive concept powerMELA duo280 for the retrofit business area

At this year?s Power2Drive trade fair in Munich, STW is to present its new drive package for utility vehicles with an output of 160 to 280 kW. This package comprises two electric motors with 80 or 140 kW output respectively. The motors drive the summation gearbox, which in turn transmits the force onto the standard gearbox of the utility vehicle. This permits the concept of ?Diesel out, electric in? to be realized with little mechanical conversion required and without increasing the original total weight (incl. battery). Furthermore, the series-produced and field-tested drive concept guarantee ...

13.05.2019

ix Industrial® Ethernet Connector test adapter for FLUKE DSX CableAnalyzer?

HARTING, HIROSE and FLUKE networks announced the availability of an adapter supporting the ix Industrial The ix Industrialons in the installation process can cause issues ranging from intermittent to total network failures leading to unplanned downtime. Certifying the installed cabling to industry standards during deployment reduces start-up time and prevents costly cabling-related downtime.? The miniaturized ix Industrial The FLUKE networks DSX CableAnalyzer Series is part of the industry?s leading cabling certification system, supporting the most extensive variety of in-plant cabling up to a ...

13.05.2019

Charging points now compliant with German calibration law with the Bender CC612 charge controller

The choice of the charge controller is a fundamental decision, as it is the heart of every charging station and thus has a significant influence on its function. With its intelligent CC612 charge controller, Bender provides the basis for an AC charging station or wallbox that not only stands out for economic efficiency und safety, but now also enables a charging infrastructure to be set up in compliance with German calibration law. The technical basis for billing in compliance with German calibration law is provided by the combination of the CC612 charge controller with the energy meter develo ...

10.05.2019

AA746 FreePitch Sensor for Angle Measurement

The new AA746 FreePitch sensor ? based on the anisotropic (AMR) effect ? meets customers'' requirements for greater air gaps while maintaining high precision for angle and length measurement in harsh environments. Compared to other sensor types belonging to the AA700 family, the AA746 has a higher sensitivity and therefore requires a lower saturation field strength. The higher sensitivity results from the fact that the sensor geometry and layer structure were designed in such a way that the field strengths from only approx. 3 mT are sufficient to bring the sensor into saturation mode ...

09.05.2019

Save the date: Eplan Virtual Fair on 21 May 2019

Digitisation will be Eplan Eplan is hosting a Virtual Fair just a few weeks after the Hannover Messe. Along with the new motto this year - Interactive -the event has been redesigned to help reflect its trade fair flair. Another innovation is extended live operations: There will be a full sixteen hours of broadcasting, presenting and talking shop - from 6:00 a.m. to 10 p.m. (CEST). Numerous countries from Europe, Asia and North America will be participating live and will also be setting up country pavilions where customers and attendees can receive information specific to their local markets.In ...

08.05.2019


Page 1 from 105:  1 2  3  4  5  .. » 105





All members: 9 213
Register today: 0
Register yesterday: 1
Members online: 0
Guests online: 53


Don't have an account yet? You can create one. As registered user you have some advantages like theme manager, comments configuration and post comments with your name.

Categories:


[ more PressReleases ][ RSS-Feed ]