register free | resend password

Manufacturing & Production

Themenbereich / Manufacturing & Production


Sortiere PresseMitteilungen nach: Titel (A\D) Datum (A\D)

Seiten sind aktuell sortiert nach: Datum (erst neue PresseMitteilungen)

Fluctuation range of production and sales in German machiner yindustry significantly increased since 2012

The trend report applies Bollinger Bands to the development of production and sales since the year 2000. This statistical measure, which is widespread in the financial world, covers 67% of all values deviating from the average of the last 12 months. Thus, at a glance, the bands illustrate the fluctuation range of production and sales over a period of 18 years. The trend report divides this long period into four stages. As expected, in the period of the last global economic crisis the fluctuation range of production was greatest with 43.5 index points and sales with After overcoming the cris ...

10.10.2018

Purdue University and CADENAS partner to enhance student learning of parts management technology with CAD and PLM systems

The Department of Computer Graphics Technology at Purdue University has partnered with CADENAS to implement their Strategic Parts Management software PARTsolutions to expose students to industry-leading technology and real-world applications for careers in design engineering. PARTsolutions is a parts management system that promotes part reuse and design efficiency. It enables students to search for parts data and CAD models for internal standard parts, industry standard parts and commercial parts from over 800 manufacturer catalogs. With this technology in the classroom, students can easily fi ...

09.10.2018

Growth trends of production and sales in German machinery industry at 3.3% resp. 3.2% p.a. in August 2018

The new Quest Economic Report determines the trend growth of production of the German machinery industry. The trend is set to be the average of the last 12 months. Since March 2017, a production growth trend has developed with a growth rate of 3.3% per year until August 2018. This growth trend has replaced a five-year stagnation phase. If this stagnation phase is taken into account, production of machinery industry has been growing by 0.8% per year since 2012. The new Quest Economic Report uses Bollinger Bands for the first time, a statistical gauge of the fluctuation range of variables tha ...

09.10.2018

Plunet opens up new career opportunities in the translation industry for students at KTU

Thanks to the cooperation agreement between Kaunas University of Technology in Lithuania and Plunet GmbH, students and graduates of the course Translation and localisation of technical texts can now expand their knowledge in the field of translation management. With the help of Plunet, they will learn how to professionally implement project management tasks. Project management skills are in high demand for translators Plunet BusinessManager is the leading business and translation management software. From customer requests to quote, order, job, and invoice management and reporting, the whole w ...

08.10.2018

Are export shares of German machines synchronous with the industrial production of export countries?

These countries accounted for 75% of machine exports from Germany in 2017. The comparison of machine exports and industrial production is useful as industrial production is an important economic indicator for the demand for machines. The Quest Export Report identifies synchronous and asynchronous developments between machine exports from Germany and the industrial production of the export countries concerned. The long-term horizon of nine years from 2008 to 2017, the standardization of the pre-crisis year 2008 as a common starting line and finally the quantification of the growth rates of m ...

08.10.2018

Ethereum: Luxe-Domains replace 42 character hash and Eth-Domains

With a market cap of over $28 billion USD, Ethereum it is now one of the top 20 most valuable currencies in the world - major retail organizations such as Overstock and Shopify now accept Ethereum as a method of payment not only for themselves but throughout their e-commerce platform for online stores and retail point-of-sale systems. Growth in other segments of the Ethereum platform such as Smart Contracts and Decentralized Applications (DApps) continue to gather momentum across a number of industries, ranging from banking to voting, as the benefits of blockchain technology are leveraged. Sma ...

06.10.2018

ISEC7 CEO Marco Gocht to Deliver Industry Insights for Mobile IT at the Enterprise Mobility Summit 2018 in Frankfurt

The 6th Enterprise Mobility Summit will soon start in Frankfurt am Main, Germany: On October 18th and 19th, leading enterprise mobility community experts will discuss about enterprise mobility strategies, business process mobilization and cyber security challenges. The enterprise mobility expert from Hamburg, Marco Gocht, will be talking about the perfect play of unified endpoint management (UEM) & Microsoft technologies, as well as, security challenges with mobile IT. Marco Gocht, CEO ISEC7, explains: "Unified Endpoint Management (UEM) is the standard these days." Enterprise mob ...

05.10.2018

New cost efficient entry-level platform for high-end embedded computing

congatec inces with its optimized cost and performance-per-watt quad-core processor as well as support for low-power high-bandwidth DDR4 RAM. Its fast 16 PCIe Gen 3.0 lanes make it a perfect candidate for all the new artificial intelligence (AI) and machine learning applications requiring multiple GPUs for mion for price sensitive high-performance applications, that comes on demand with sophisticated passive or active cooling solutions from a single source. Typical use cases range from all the manifold connected embedded, industrial, and IoT applications up to the brand new systems with embe ...

04.10.2018

Unymira presents new Customer First solutions at Service Management World in Orlando

Unymira showcases its innovative solutions for optimizing IT service desk processes and costs at HDI Service Management World 2018 in Orlando, U.S., from October 15 ? 17 (booth#203). The focus is on the intelligent self-service systeme Knowledge Bot are also being presented. ?We?ve developed intelligent Customer First solutions which can be integrated seamlessly in IT service management processes to address the high requirements demanded in IT support. They not only reduce the volume of IT tickets and the cost and effort involved in handling them, but also ensure high customer satisfaction. As ...

04.10.2018

Keros Digital enters the Beauty World with the Lumene E-Shop

The new Lumene website is live. The e-commerce project undertaken by the Finnish natural skincare company with Keros Digital is completed with the launch of a functional and flexible digital platform. Lumene is a Finnish manufacturer of beauty products which allow users to experience the purity of Nordic resources in line with new consumer trends in cosmetics. The firm?s collaboration with Keros Digital arose from its decision to focus on digital sales in order to reach today?s advanced markets. Even before opening physical stores, in fact, Lumene With the support of Keros Digital, the firm de ...

02.10.2018

VI-grade reports adoption of DiM150 at Audi Motorsport

VI-grade today announced that Audi Motorsport has chosen the dynamic driving simulation solution DiM150 (Driver-in-Motion) designed by VI-grade and engineered and manufactured by Saginomiya. The driving simulator, equipped with a Formula E and DTM car cockpit, is currently being installed at the Audi Motorsport site in Neuburg, Bavaria (Germany) and will be used for the virtual fine tuning of the dynamic performance of the vehicles developed and marketed by Audi Motorsport as well as for professional driver training. ?We are delighted to report on the installation of our driving simulation sol ...

02.10.2018

Ranking of the ten most attractive EU countries for machine exports from Germany

Industrial production is the most important economic indicator for the demand for machinery. So the new Quest Report compares the development of industrial production in the ten EU countries that alone account for 80% of German machinery exports to the EU. These are in alphabetical order and with the export quotas of German machines the countries France (14%), Great Britain (10%), Italy (10%), Austria (9%), Netherlands (9%), Poland (8%), Czech Republic (7%), Spain (6%), Belgium (5%) and Hungary (5%). The Quest Report compares the growth rates of industrial production in these countries with t ...

02.10.2018

Molecular Health To Attend Key Events and Scientific Conferences In The Fourth Quarter 2018

Molecular Health (MH), a leading biomedical company that is transforming molecular data into clinically actionable information for efficient and safer cancer treatment options based on its proprietary Dataome Bill and Melinda Gates Foundation Grand Challenges Meeting. October 15-18, 2018 - Berlin, Germany. Attendance: 1 poster and 1 workshop. ESMO2018 - European Society for medical oncology congress. October 19-23, 2018 - Munich, Germany. Attendance: Molecular Health booth. Executive Decision-Making Conference - Portfolio Management. October 23-24, 2018 - Hyatt at the Bellevue, Philadelphia. A ...

01.10.2018

DiscVision becomes Alexa Voice Service (AVS) Solution Provider

DiscVision GmbH, a German software design house, today announced that it is an Alexa Voice Service (AVS) Solution Provider with a solution qualified by Amazon. DiscVision provides solutions for visual devices such as TV sets, set-top boxes and media players, among other related devices. DiscVision?s voice control solution, the DiscVision SDK with AVS integration, will allow device makers to build Alexa into products ranging from TVs to smart speakers and more, streamlining the process for building voice control into a variety of devices. The DiscVision SDK can turn visual devices into Alexa e ...

01.10.2018

HYBRID Software and Arden Software to show integrated solution at ScanPack

Arden Software will premiere the latest release of its cutting-edge packaging design software ? Impact CAD 2018 ? at Scandinavia?s leading packaging exhibition ScanPack 2018. Created by packaging designers for packaging designers, Impact CAD incorporates everything you need through one integrated product ? perfect for brand owners, designers and die-makers alike. The latest release delivers a suite of new features, including a plug-in for Adobe Illustrator, extending Impact?s graphic workflow capabilities. Arden Software, which specialises in CAD and CAM software for the print and packaging in ...

01.10.2018

Machine exports to China again ahead of the USA - for the first time since 2014

Machine exports to China saved the German mechanical engineering industry from a sudden crash in the global economic crisis of 2008/2009. The export ratio to China climbed from 6.6% to 9% in the crisis, then 10.7% and reached its previous peak of 11.5% in 2011. At the same time, machinery exports to the USA, the number one export country outside the EU, fell from 7.8% to 7.0% and then rose again slightly to 8.1% by 2011. Since 2014, export markets have shifted back to the pre-crisis level, a backward shift that was completed in 2017. Machinery exports to the USA exceeded those to China agai ...

01.10.2018

Luxe-Domains, Blockchain and Ethereum

If you are not familiar with Ethereum, or have only heard about it as a cryptocurrency, it is first and foremost a platform that allows anyone to create applications, services and digital assets on the Blockchain. Activities and interests such as ownership of tangible (houses, cars) and intangible assets (stock certificates, legal agreements) are recorded in a public, digital ledger that is decentralized (i.e. cryptically stored on multiple computers instead of one central computer). Each time an exchange of assets occurs, cryptographic blocks record the data which are connected to the block b ...

29.09.2018

Efficient handling of piping objects in MCAD, plant and BIM data

Piping objects are not only used in MCAD for vehicles, ships and machinery but, also in off shore plants and in the BIM space in regards to buildings. Depending on their responsibility, users must perform different review processes and inspections of the CAD data. As piping objects vary from other solids and faces, these users must have access to specialized tools and analysis options. 3DViewStation?s standard functionality supports these processes by: loading native or pre-translated CAD files and giving users the ability to isolate and inspect sub-assemblies. In addition, it allows for vario ...

28.09.2018

it-sa 2018: MATESO introduces latest Password Safe version

From 9-11 October 2018, MATESO will be showcasing its latest software edition at it-sa. The Password Safe team will be on site with its key partners on a joint booth (exhibition center Nuremberg/hall 9, stand 346). To experience Password Safe live on the stand, visitors can also set an appointment and get free tickets. Prelaunch: Presenting Password Safe version 8.6 MATESO will provide concentrated insights into the new password safe version via live demonstration. For instance, version 8.6 adds features like Heartbeat or Rollback. Apple users can enjoy the brand-new features as well: On the s ...

27.09.2018

Slightly declining market shares of packaging machines from Germany in the EU 2017 - new Quest sector report

In the EU, sales of packaging machines increased by 7% from 2016 to 2017. Sales of outer packaging machines, which account for the lion''s share, rose by 10%, filling and sealing machines fell by 3% and sales of cleaning machines increased disproportionately by 12%. The latter, however, only have a market share of 4%. The market for outer packaging machines is in the hands of seven EU countries with Italy far at the top, followed by Germany with a constant market share of 18%. Changes in the market shares of German packaging machines can be seen in filling and sealing machines as w ...

27.09.2018


Page 2 from 204:   1 2 3  4  5  .. » 204





All members: 8 810
Register today: 0
Register yesterday: 2
Members online: 0
Guests online: 71


Don't have an account yet? You can create one. As registered user you have some advantages like theme manager, comments configuration and post comments with your name.

Categories:


[ more PressReleases ][ RSS-Feed ]