register free | resend password

Manufacturing & Production

Themenbereich / Manufacturing & Production


Sortiere PresseMitteilungen nach: Titel (A\D) Datum (A\D)

Seiten sind aktuell sortiert nach: Datum (erst neue PresseMitteilungen)

Acando implementing end-to-end monitoring for the webshop of a leading European DIY chain

One of the largest operators of DIY superstores and garden centers in Europe has implemented an end-to-end application performance monitoring system for its web shop. Key figures on webshop traffic and user-oriented performance can thus be viewed on an integrated basis. The selection and introduction of a suitable monitoring tool was the responsibility of the webshop specialists at management and IT consultancy Acando. To ensure the best possible shopping experience, the performance of the DIY online shop is to be continuously improved as the product range grows. Application performance monito ...

27.09.2018

Boris Diebold joins Seven Senders GmbH as CTO

Boris Diebold joined the SEVEN SENDERS team as Chief Technology Officer (CTO). In his new role as a member of Executive Management, he is responsible for the entire technical area as well as parts of Product Development. Boris Diebold will work with the founders to expand the strategy of the SEVEN SENDERS delivery platform ? especially with regard to the proprietary SaaS product SENDWISE and the integration of additional digital and physical services into the platform. ?We are very happy to welcome Boris Diebold to our team, a veteran expert in the software industry and in scaling-up startups. ...

26.09.2018

ISEC7 Group Joins AppConfig Community

The enterprise mobility expert ISEC7 Group (ISEC7) announces that it has joined the AppConfig Community with its product ISEC7 Mobile Exchange Delegate. With AppConfig Community best practices enabled, ISEC7 customers can deploy the ISEC7 app across any major enterprise mobility management (EMM) solution. ISEC7 Mobile Exchange Delegate provides access to Microsoft Exchange, Office 365, calendar, emails, contacts, tasks and notes from third parties via smartphones. With ISEC7 Mobile Exchange Delegate, authorized representatives can confirm, establish or change appointments for employees, collea ...

25.09.2018

Growth trends in production and sales in the German mechanical engineering in July 2018 at the same level of 3.2% p.a.

Since March 2017, production in the German mechanical engineering sector showed a growth trend of 3.2% per annum until July 2018. This growth trend has replaced a five-year stagnation phase during which production increased by only 0.7% per year. The Quest Trend Magazine records the growth trend as a moving annual average of the monthly indices of the Federal Statistical Office. With 105.9 index points in July 2018, this growth trend of production marked the highest value since the outbreak of the global economic crisis ten years ago. Sales in the German machinery industry are also showing ...

25.09.2018

IMCo Smart Shelf Technology at the InterTabac 2018

Precise out of stock analysis is key to increased sales. The Berlin based expert for intelligent shelves is presenting an innovative new set of product solutions at the tobacco industrymart Shelf is ideal for the many different sized tobacco products and accessories and is usable on a peg or push system. The Point of Sale in focus What exactly is happening directly at the point of sale (POS)? Whoever can determine the stock and removal data on a product level will minimize short sales, increase turnover and get a competitive advantage. IMCo technology creates a source for connecting the retail ...

24.09.2018

MOVET® offers 3D CAD models of its Blue Hygienic components via a CADENAS product catalog

Blue flange bearings for food and pharma industries are available as a 3D CAD download MOVETproduct catalog MOVET The hygiene specialist HADI provides its MOVETntrasting color blue, which does not appear in practically any of the food. In case of a malfunction, a minimum of plastic particles can be found. The ball bearings are lubricated for life with grease filling that''s food-compliant according to NSF H-1 approval. Grease nipples are no longer necessary. Maintenance intervals are shortened and there is no longer any risk of incorrect relubrication. Moreover, shaft seals and prote ...

24.09.2018

Trade war of the US with China: Trump''s reasons for protective tariffs are misleading and hypocritical

According to Trump, the protective tariffs are intended to eliminate the "unfair" US trade deficit with China, protect jobs in the US and prevent further "theft" of intellectual property and American technology. The fact is that the numbers of the trade deficit "do not capture the true size of US business in China," according to the study by Deutsche Bank Research. Part of this US business in China is that US companies such as Apple or General Motors produce in China and have sold more iPhones and more cars there than in the USA itself. Furthermore companies from ...

24.09.2018

New at signotec: The signoAPI Android

In addition to the signotec signature pads and signature software, signotec also offers powerful developer tools. The signoAPI is a complex interface for the integration of PDF functions and ISO-compliant PDF signatures. In addition to the native Windows version and the variants for Linux (Java) and Apple iOS, signotec has now further developed the signoAPI for the Google operating system Android. With the signotec APIs you can develop or extend your own applications for simple or advanced electronic, handwritten signatures. For many years, the signoAPI Windows has provided the base-interface ...

21.09.2018

ABIT Group outperforms targets for H1 2018

The ABIT Group will shape the digitalization of the credit management and collection process with the aim to build Europe The ABIT Group (ABIT, Eurosystems, CWize) is a market leader specialized in the digitization of intelligent credit and receivables management processes and offers its more than 800 customers innovative and customized solutions and services in the areas of software and consulting. To achieve this, the company develops solutions for every phase of business processes, for companies of all sizes and industries, from banks to service providers to the insurance secto ...

20.09.2018

Automatic generation of technical documentation

An important component of each customer project in plant- or special machine construction is the creation of complete and specific documentation of the respective product. The individual components of this overall documentation nearly always come from different sources, are in different formats and are of varying quality. With Direct Publishing, a software solution from SEAL Systems, this data and these files are automatically compiled in the right sequence into a new document with a uniform layout. Complete documentation includes, for example, drawings, Excel tables, Word documents, maintenan ...

20.09.2018

A picture is worth a thousand words - Find the desired component with CADENAS Sketch Search

Whether painted by an elephant or human hand ? pictures say more than 1,000 words. Although we usually know what we mean or are looking for, it might be difficult to describe or to give it a name. That''s the way it often goes when engineers and purchasers are in search of a component needed for their product. It''s often easier and more accurate to sketch the outline of a component than to describe it in words. Find your desired component completely without words The 2D Sketch Search by CADENAS, based on the Geometric Similarity Search, leads engineers and purchasers quick ...

20.09.2018

The growth rates of industrial production for 82% of German machinery industry’s export countries

The new report in the Quest Trend Magazine identifies the yearly growth rates of the global industrial production, the most important economic indicator for machinery industry and automation technology. The new report covers countries that absorbed 82% of all machine exports from Germany in 2017. These are the EU, the USA and Japan (61%), the BRIC countries Brazil, Russia, India and China (15%) as well as the MIST countries Mexico, Indonesia, South Korea and Turkey (6%). The report identifies the annual growth and change rates of industrial production after it had overcome its crisis low in ...

20.09.2018

The degree of realization of Industry 4.0 in the sectors of the German machinery industry - Quest study

The new report in the Quest Trend Magazine publishes from the study the degrees of realization of Industry 4.0 in machine automation in ten sectors of mechanical engineering. The "degrees of realization" correspond to the five development stages in which Industry 4.0 is realized as a process. This starts with planned changes, continues with isolated implementations and extends to Industry 4.0 in subsystems and finally as system solution covering the entire machine/plant. The study has examined eleven automation areas at the machines in numerous discussions with machine builders. Th ...

19.09.2018

CNC Milling Career Day at RAMPF

Wangen (Göppingen), September 17, 2018. For those who are interested in pursuing a career in programming and setting up state-of-the-art machines for grinding ultra-precise components and parts, the RAMPF CNC Milling Career Day in Bessenbach on September 21, 2018, from 2 to 5:30 pm, is a must-attend event. When it comes to accuracies in the μm range – one millionth of a meter –, the interaction of man and machine must work perfectly. Only in this way can ultra-precise machine components be manufactured. At the Precision Grinding Center of RAMPF Machine Systems in Bessenbach, Ger ...

17.09.2018

Future Ready for Audit, Ready for MES-

Instead of a painful, time-consuming and costly process, what if being audited by the FDA, or any other regulatory body, was just part of the day to day routine? After all, the FDA is looking to shift the focus from inspecting product quality in at the end of a process, to ensuring quality is built in. For the MedTech industry this makes perfect sense ? it would not only reduce the financial overheads associated with being audited, it would also substantially reduce time and business risk. With its ?Case for Quality?, the FDA is looking to identify medical device manufacturers that consistentl ...

14.09.2018

ISEC7 receives BlackBerry Awards

ISEC7 Group (ISEC7) has received BlackBerry Awards in the ISV Category ?Top Innovation? and in the Channel Partner Category ?Top Specialist? in London. The global enterprise mobility expert was honored for its excellent consultation and professional services as one of BlackBerry?s top integration partners during the BlackBerry Security Summit in London on September 11. Marco Gocht, CEO ISEC7 Group, says: ?Receiving the BlackBerry Awards makes us extremely proud. We?ve been a BlackBerry partner for more than 15 years, working cooperatively to help our customers in all areas of mobilizing busine ...

12.09.2018

Current BIM trends that are important for component manufacturers

Everyone is talking about Building Information Modeling (BIM) these days. With its help, construction projects can be digitally mapped with all relevant information and projects thus processed more effectively. A consistent planning phase presupposes, however, that all information about building components are available online, via digital product catalogs, for instance. Stefan G How would you tell people exactly what an online component catalog is? Stefan G, which makes it possible to offer the right product at the right place at the right time. An online component catalog is the ideal soluti ...

12.09.2018

LMI Technologies Officially Releases Gocator® Firmware 5.1

LMI Technologies (LMI), a leading developer of 3D scanning and inspection solutions, is pleased to announce the official launch of Gocator Surface Segmentation Tool This tool identifies discrete parts contained within a 3D surface scan even if they are touching or partially overlapping. This allows the user to report statistics on global information such as part count, min/max height, width, and length. And, with an SDK application or GDK tool, engineers can apply 3D surface measurements on individual parts. The Segmentation tool can be used for applications where multiple parts appear in the ...

11.09.2018

New synapses for the plant''s "brain"

At the SPS IPC Drives 2018, Aucotec will show how its new DCS portal significantly shortens the path from engineering to control system programming. With the portal, the specifications from the plant design can be automated and transferred directly to the programming of common control systems (DCS: Distributed Control Systems). One portal for all This unique bridge leads to any automation system that is capable of communication, even in parallel with several of them. This makes the portal particularly useful for general contractors (EPCs) or for operators who have different control systems in ...

11.09.2018

International Pharmaceutical Industry Accepts Arvato Systems? and Traxeed?s Invitation to Berlin

br /> Arvato Systems and Traxeed are bringing pharmaceutical experts from all over the world together again for a two-day networking event The event, which will take place on 15 and 16 October, will focus on the successful implementation of global serialization requirements Around 200 representatives from international pharmaceutical manufacturers, licensed pharmaceutical wholesalers, representatives of national verification systems from 15 countries, implementing companies, and representatives from other industries in which product traceability is becoming increasingly important will meet ...

10.09.2018


Page 3 from 204:   1  2 3 4  5  .. » 204





All members: 8 810
Register today: 0
Register yesterday: 2
Members online: 0
Guests online: 66


Don't have an account yet? You can create one. As registered user you have some advantages like theme manager, comments configuration and post comments with your name.

Categories:


[ more PressReleases ][ RSS-Feed ]