register free | resend password

Family

Themenbereich / / Family


Sortiere PresseMitteilungen nach: Titel (A\D) Datum (A\D)

Seiten sind aktuell sortiert nach: Datum (erst neue PresseMitteilungen)

A flying bridge

It''s an impressive image when a massive bridge is slowly suspended in the air to seemingly float effortlessly before it accurately joins in where it was intended. A task that looks so simple is the result of very detailed planning and high-tech equipment made by RUD. Onlookers were in awe of the result at the installation site of a bridge consisting of prefabricated elements. Throughout the entire project the team faced very specific challenges during loading and installation. Bridge elements consisted of precast concrete. The challenge: these large elements, at a length of around 2 ...

02.08.2019

Smart compressed air for tomorrow''s plastics industry

Digital technologies are taking over the plastics and rubber industries as well. In order to make production processes even more efficient, a future-proof compressed air supply is essential. Kaeser compressors and treatment components combine impressive performance and energy efficiency with maximum compressed air availability and minimal maintenance requirement. Every part of a compressed air station, whether it be the compressors, compressed air treatment components or distribution system, should operate as efficiently as possible for its own sake. But these components are not individual pla ...

02.08.2019

No more searching

Metalworking companies are often successful against tough competition when their reactions are quick and flexible. This especially affects small contract manufacturers, such as Adelmann Metallbearbeitung GmbH. However, since using the StoreManager Duo from ARNO Werkzeuge, the company increased its productivity and competitiveness. All tools are now available quickly and dependably The combined carousel and drawer system manages and orders tools with great reliability. And thanks to the lease-purchase solution, the system is suitable for all sizes of companies. ??Where?s the tool? Who hasn?t pu ...

01.08.2019

Smart and efficient compressed air solutions for every need

Proudly celebrating its centenary in 2019, Kaeser Kompressoren is set to present a wealth of its innovative products and services at the EMO. Catering to users of all sizes from all market sectors, Kaeser offers the perfect solution for a reliable, efficient and future-oriented compressed air supply ? all within the scope of Industrie 4.0. Highly efficient compressors, effective compressed air treatment systems, smart engineering and intelligent services are just a few of the highlights that reveal the modern face of needs-based compressed air production, combined with good planning. We are of ...

31.07.2019

The new DEPRAG step feeder system: eacy step feed

Once the doors open, all the big names in the industry can be found at the MOTEK international trade fair for automation in production and assembly from the 7th to the 10th of October 2019 in Stuttgart. Designers and operators will find cross-sector approaches, ranging from detailed solutions to turnkey system solutions. The unique industry platform showcases a wide range of cutting-edge solutions and the latest trends for optimisation in assembly processes. In hall 5, at stand 5302, trade visitors can discover in-depth the latest innovations from DEPRAG. The focus is on the timely supply of p ...

30.07.2019

New and improved biocide-free MWF

Oemeta Chemische Werke GmbH is appearing at EMO to present NOVAMET results when the product is used in demanding machining processes with all kinds of materials. The new MWF meets all legal requirements and boasts high biostability, meaning that it has no impact on health and has a long service life. ?We?ve optimised an already successful boron-free and biocide-free product using cutting-edge ingredients,? says Malte Krone, Head of Marketing & Product Management at Oemeta Chemische Werke GmbH. The relaunched NOVAMETis extremely robust despite being biocide-free and can be used in demanding ...

30.07.2019

soniKKs® Ultrasonic Generators Suitable for Any Application

Within the industrial area ultrasonic has become a very popular instrument to professionally realize a variety of applications. For this reason, soniKKs Individualized Customer Solutions on Request The wide range of soniKKs Apart form standard products the enterprise is specialized in developing and manufacturing customized, individual devices. For this purpose, regular tests are made to find out if the processing of a certain type of material via ultrasonic is possible. The range of application of soniKKsdrawing dies. Generators - Versatile Usable Furthermore, soniKKstween ultrasonic device a ...

25.07.2019

New electrical position indicator for high-purity valves GEMÜ C12A

With the new GEM electrical position indicator, GEM The position indicator is available as a mounting part for the pneumatically operated GEM diaphragm globe valves and is particularly suitable for automation in wet process equipment. The GEMlectrical protection class and is operated with a 24 V DC connection. The GEM The globally focused, independent family-owned enterprise was founded in 1964. In 2011, Gert M The Group achieved a turnover of over ?330 million in 2018 and currently employs over 1900 members of staff worldwide, over 1100 of whom are in Germany. They have six manuf ...

24.07.2019

Zero material and solvent losses from pre-shot and flushing shot

The ELASTOLINE low-pressure metering machines for elastomer casting have been an established, state-of-the-art product range for decades. However, low-pressure casting has one distinctive disadvantage: the loss of material and solvents due to technical reasons. Hennecke''s new ELASTOLINE HP high-pressure elastomer casting machines make these material losses a thing of the past. The high-pressure mixhead of the new ELASTOLINE HP mixes the exact material quantity required for the production run. Material savings through the use of high-pressure technology can add up to a five or six-fi ...

19.07.2019

Metal Detector for the Quality Inspection of Rubber Mats

CY Handee Rubber Mouldings in the north of Malaysia produces rubber mats for a renowned international furniture company and is market leader in Malaysia. To meet the quality requirements that are demanded by the furniture company, CY Handee Rubber Mouldings decided to install a metal detector, and for this purpose they compared and evaluated Sesotec and another supplier. For final quality inspection CY Handee Rubber Mouldings wanted to inspect large boxes filled with rubber mats before they leave the company. The objective was to ensure that the boxes exclusively contain rubber mats without an ...

19.07.2019

Deburring and cleaning plastic components with CO2 snow in a single dry process

Plastic parts invariably have burrs after injection molding or mechanical processing. The quattroClean technology from acp systems AG has proved to be an efficient, inline-capable deburring and cleaning alternative for hard and brittle plastics such as PEEK and PPS. Deburring and cleaning are carried out in a single dry process. There are practically no limits to the use of plastics today. From medical technology through automotive engineering and electronics to household and leisure products, polymer all-rounders enable innovative solutions. However, regardless of whether components are injec ...

18.07.2019

Component Quality Masters the Balancing Act

Many industrial sectors are currently undergoing future-oriented change. There can be no question that characteristics such as burr-free parts, surface finish and cleanliness have a decisive influence on component quality. As the only international trade fair for deburring technologies and precision surface finishing, DeburringEXPO presents corresponding offerings in a concentrated and comprehensive fashion which is unparalleled by any other event. The 3rd leading trade fair for deburring technologies and precision surface finishing, which will take place at the Karlsruhe Exhibition Centre fro ...

18.07.2019

Endress+Hauser strengthens expertise for advanced analysis

Endress+Hauser has expanded its center of competence for advanced analysis in Lyon, France. The Group invested 2 million euros in a new production facility and office space to meet the growing demand in the area of advanced process analyses. From Lyon, around 20 employees support Endress+Hauser sales centers across Europe in the application and sales of advanced analysis technology, with a focus on the project business and after-sales services. Ten Endress+Hauser sales centers across Europe already have specialists on board to handle this complex field of activity. Customer-specific manufactur ...

18.07.2019

Solvent based cleaning at high pressure

Increasing demands on cleanliness, in terms of freedom from both particulate and film-type contaminants, call for the use of adapted cleaning solutions. These now include a new spray cleaning system for solvent-based cleaning machines by Ecoclean. With this process option, spray processes and injection flood washing can be performed at adjustable pressures between 10 and 16 bar via two spraying bars. The additional cleaning capability delivers markedly improved cleaning results on geometrically complex parts and bulk-cleaned items. Spray cleaning systems are already a feature on many solvent-b ...

18.07.2019

Value Engineered Products'' 490 series pressure switches selected for hydraulic systems safety monitoring on BOOM XB-1 supersonic demonstrator aircraft

Value Engineered Products (VEP), part of the USA-based World Magnetics family, is represented in the UK by Variohm EuroSensor. As a leading manufacturer of high-precision pressure, vacuum and differential switches for the aerospace industry VEP recently announced its supply partnership with the Boom XB-1 Mach-2.2 supersonic demonstrator aircraft. VEP supplies its 490 series pressure switches for safety monitoring on various hydraulic systems on the XB-1. These lightweight and high reliability aluminium switches feature dual-springs for accuracy and stability and are designed to meet the FAA?s ...

17.07.2019

Galaxie® - superior on principle

The Galaxiesystems with a wide range of gear ratios will round off the portfolio of technologies on show for demanding engineering applications. EMO ? the ?Exposition Mondiale de la Machine Outil? ? is the world?s premier trade fair for the metalworking industry. It provides an ideal platform for showcasing mechatronic drive technology made by WITTENSTEIN. Galaxie The inherent superiority of the Galaxie torque density and overload capacity. Dynamic teeth instead of a rigid gear ring, tangential and hydrodynamic tooth contact over the full surface when loaded and a new type of bearing with a se ...

15.07.2019

Detectors protect frozen fish products from metal contamination

The Danish company Fisker Skanderborg A/S, a supplier of packaging equipment, has sold two Sesotec Metal Detection Systems of the type VARICON COMPACT to P. Taabbel & Co. A/S in North Jutland. Taabbel processes all types of fish and shellfish into products for caterers at home and abroad. Taabbel?s mission and goal is to produce food constantly at a high quality standard that complies with applicable food safety regulations, especially the requirements based on HACCP principles. The metal detection system VARICON COMPACT from Sesotec consists of a tunnel metal detector, a conveyor belt and ...

12.07.2019

New thermally conductive adhesives for manual applications

Polytec PT has added three products to its extensive range of thermally conductive adhesives, which can be easily processed from side-by-side cartridges. When used as a bonding technique, thermally conductive adhesives fasten components to create a durable mechanical connection, while enabling heat to transfer from the warmer component to the colder component. Thus in many cases, thermally conductive bonding, in particular with epoxies is an alternative to conventional connection processes such as soldering, welding or mechanical attaching. The processing of two-component systems is often a ch ...

12.07.2019

BILSTEIN TRADING (SHANGHAI) to showcase premium quality steel solutions at MetalForm China 2019

BILSTEIN TRADING (SHANGHAI), a company of BILSTEIN GROUP, will, for the first time, be on hand at MetalForm China in 2019 ? to be held from 17-20 July - to showcase how its advanced capabilities in cold rolled steel solutions for the automotive and industrial sectors can benefit customers in the region. The company, which can be found at stand M18, hall W2, produces the highest quality cold rolled steel from plants in Europe and the US, and is introducing brand new product options to the region via its long-established Shanghai Trading business. Mr. Marc T. Oehler, CEO, BILSTEIN GROUP, comment ...

11.07.2019

Smallest model now launched for new miniature programmable Hall Effect angle sensor range: Variohm EuroSensor''s Euro-CMRT micro threaded angle sensor offers extensive option and customisation selection

With a diminutive 10 mm diameter housing, M8 threaded mounting and a 3.175 mm diameter flatted shaft, Variohm EuroSensorC input. Variohm Euro-CMRT series is available in its smallest package size to date. The M8 mounting and small envelope will facilitate mounting in the smallest spaces as well as allow custom flange adaptations for form-fit replacements for competitor products and application upgrades for existing Variohm applications. The high grade anodised aluminium housing supports the 316 stainless steel shaft in a durable phosphor bronze sleeve bearing and with no sensor contact, long l ...

10.07.2019


Page 5 from 423:  « ..  4 5 6  7  .. » 423





All members: 9 429
Register today: 1
Register yesterday: 0
Members online: 1
Guests online: 90


Don't have an account yet? You can create one. As registered user you have some advantages like theme manager, comments configuration and post comments with your name.