register free | resend password

RFID Technology in Health Care Areas: Point-of-Care Laboratory Diagnostic Systems for Real-Time Analysis of COVID-19

The ongoing COVID-19 pandemic poses increasing challenges for the healthcare industry. COVID-19 diseases must be detected immediately in order to stop their spread by the virus. It is therefore important that blood tests are diagnosed as soon as a blood sample is taken. The use of mobile and stationary diagnostic systems at the point of care represents an innovative solution for the immediate diagnosis of illnesses. Microfluidic test strips, a standardised workflow and connectivity to the cloud in the hospital IT infrastructure provide real-time results. Certain parameters allow the delivery of precise results equivalent to stationary laboratory tests.

ID: 1560802
recent pressrelease next pressrelease

(businesspress24) - ► Equipment of Point-of-Care Diagnostic Systems with RFID Technology
The Integration of an RFID OEM Module in diagnostic systems validly identifies the batch packaging of the respective test. RFID OEM Module M890 operates in the high frequency range of 13.56 MHz and validly reads out all data in the close range of up to 8 cm. After successful tag authentication, all test parameters are stored in the system. The pre-defined test parameters and all patient data can be written to the RFID OEM module. This enables the transfer to the patient file immediately.
More Information:

► Attaching RFID Tags to Batch Packs
In order for the data on the microfluidic test strips to be read, corresponding RFID tags are required on the batch packaging. The calibration of the correct test strip is important for the exact definition of the test parameters. Special RFID tags with a permanently usable adhesive strip are suitable for this application. Adhesive labels offer a matt white surface that protects the chip and the antenna underneath from liquids.
More Information:

► Case Study: Rapid Laboratory Diagnostic Test of Blood Samples

In laboratory environments or hospitals, rapid tests are an important solution for acute cases of illness. Embedding an RFID OEM module into an existing device is very easy due to the single-sided components. The corresponding soldering pads on the underside of the RFID module can be firmly attached to all surfaces. The batch packages with the adhesive labels can be written with a unique UID and stored data. The unique UID allows the batch packages to be assigned to the microfluidic test strip. As soon as a blood test is performed, the desired test strip must be selected. The batch package is identified by placing it on the RFID OEM module. The connection of an RFID Antenna to the RFID module enables the specific identification of the RFID Tag. The device lists all possible test parameters for the test. The medical staff inserts the test strip with the blood sample into the device. The blood is analysed directly in the device. Through communication with external data management systems, a transfer directly to the patient file is possible. The assignment of the patient to the test can be done by means of a barcode reader. The barcode reader scans the data on a barcode beforehand and transmits it to the system. This enables the automatic assignment to the patient - without any further administrative activities.

More information:

Keywords (optional):

point-of-care, point-of-care-diagnostik, point-of-care-laborgeraete, medizintechnik, rfid-healthcare, covid, 19, coronavirus,

Company information / Profile:

iDTRONIC Professional RFID, a leading manufacturer on the AutoID market, develops, manufactures and sells high end RFID products. RFID devices from iDTRONIC guarantee a fast and safe identification of moving and non-moving items.

They are available for all common RFID standards and frequencies like UHF: 865 – 928 MHz, HF/NFC/LEGIC/DESFire: 13.56 MHz and LF: 125 | 134.2 kHz.

The product portfolio fits perfectly the needs of system integrators and in IoT and Industry 4.0 application areas:

– Industrial Sector (Production, Supply Chain, Warehouse Management)

– Healthcare Areas (Medical Devices, Hospitals, Laboratories)

– Mobile RFID Solutions

– IoT Areas in Companies or Retail Areas

– Demanding Areas (Mining, Offshore, Construction Sites)

iDTRONIC Professional RFID offers:

Industrial Systems consisting of Readers/Writers and Antennas
Handheld Computers with integrated RFID and Barcode Reader
Embedded Modules
RFID Readers and Data Collectors
Special RFID Tags
Thanks to a strong technical team for development and support we are able to develop and offer high-end RFID products which guarantee to our customers:

Innovative design
High performance
Reliable quality
Fast time-to-market
Excellent value
Customer-specific solutions
Located in Ludwigshafen, Germany and close to Frankfurt International airport we are easily accessible for our international customers.

PressRelease by


Contact Person for Product Requests

Mr Patrick Kochendörfer
Senior Product Manager
– Professional RFID –

Phone: +49 621 66900 94 – 21
E-mail: patrick.kochendoerfer(at)

PressContact / Agency:

Contact Person for Media Requests

Ms Maria Mahler
Marketing Manager
– Professional RFID –

Phone: +49 621 66900 94 – 11
E-mail: maria.mahler(at)

published by: iDTRONIC_Professional
print pressrelease  send to a friend  

Date: 09/16/2020 - 10:28
Language: English
News-ID 1560802
Character count: 3358
Firma: iDTRONIC GmbH
Ansprechpartner: Maria Mahler Feedback to about Pressrelease-id:
Stadt: Ludwigshafen am Rhein
Telefon: 0621669009411

Meldungsart: Success
Versandart: _CSF_VART4
Freigabedatum: 16.09.2020

Publication permitted only with reference
(c) by

Number of hits: 283


Direct Link to this PressRelease:

We would appreciate a link in your News-, Press- or Partner-Site.

Comments on this PressRelease

All members: 9 438
Register today: 0
Register yesterday: 0
Members online: 0
Guests online: 64

Don't have an account yet? You can create one. As registered user you have some advantages like theme manager, comments configuration and post comments with your name.